Shell Industrial Gear Oil

Environmental exposure controls: Take appropriate measures to fulfil the requirements of relevant environmental protection legislation. Avoid contamination of the environment by following advice given in Chapter 6. If necessary, prevent undissolved material from being discharged to waste water. Waste water should be treated in a municipal or industrial waste water treatment plant before discharge to surface water. Local guidelines on emission limits for volatile substances must be observed for the discharge of exhaust air containing vapour.

Respiratory protection: No respiratory protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precautions should be taken to avoid breathing of material. If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, select respiratory protection equipment suitable for the specific conditions of use and meeting relevant legislation. Check with respiratory protective equipment suppliers. Where air-filtering respirators are suitable, select an appropriate combination of mask and filter. Select a filter suitable for the combination of organic gases and vapours.

Eye protection: If the material is handled such that it could be splashed into eyes, protective eyewear is recommended.

Skin and body protection: Skin protection is not ordinarily required beyond standard work clothes. It is good practice to wear chemical resistant gloves.

Environmental exposure controls:
Take appropriate measures to fulfil the requirements of relevant environmental protection legislation. Avoid contamination of the environment by following the advice given in Chapter 6. If necessary, prevent undissolved material from being discharged to wastewater. Wastewater should be treated in a municipal or industrial wastewater treatment plant before discharge to surface water. Local guidelines on emission limits for volatile substances must be observed for the discharge of exhaust air containing vapour.

Respiratory protection:
No respiratory protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precautions should be taken to avoid breathing of material. If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, select respiratory protection equipment suitable for the specific conditions of use and meeting relevant legislation. Check with respiratory protective equipment suppliers. Where air-filtering respirators are suitable, select an appropriate combination of mask and filter. Select a filter suitable for the combination of organic gases and vapours.

Eye protection:
If the material is handled such that it could be splashed into eyes, protective eyewear is recommended.

Skin and body protection:
Skin protection is not ordinarily required beyond standard work clothes. It is good practice to wear chemical resistant gloves.

Handling And Storage 

• General Precautions: Use local exhaust ventilation if there is a risk of inhalation of vapours, mists or aerosols. Use the information in this data sheet as input to a risk assessment of local circumstances to help determine appropriate controls for safe handling, storage and disposal of this material.
• Advice on safe handling: Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Properly dispose of any contaminated rags or cleaning materials in order to prevent fires. 
• Avoidance of contact: Strong oxidising agents. 
• Product Transfer: This material has the potential to be a static accumulator. Proper grounding and bonding procedures should be used during all bulk transfer operations. 

Extreme-pressure lubricant for highly loaded enclosed gears and bearings. Siemens AG approval

Features:

• If persistent irritation occurs, obtain medical attention
• In general, no treatment is necessary unless large quantities are swallowed, however, get medical advice
• Oil acne/folliculitis signs and symptoms may include a formation of black pustules and spots on the skin of exposed areas.
• Ingestion may result in nausea, vomiting and/or diarrhoea.
• When administering first aid, ensure that you are wearing them appropriate personal protective equipment according to the incident, injury, and surroundings. Treat symptomatically.
• Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only.
• Hazardous combustion products may include:
• A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be evolved if incomplete combustion occurs.
• Unidentified organic and inorganic compounds.
• Proper protective equipment including chemical resistant gloves are to be worn; the chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus must be worn when approaching a fire in a confined space. Select fire fighter''s clothing approved to relevant Standards.
• Local authorities should be advised if significant spillages cannot be contained.

Features :

• Extra protection and life
• Energy saving
• Worm drives
• Approved by or meets Bonfi glioli, David Brown and many other equipment manufacturers
• Industry standards: ANSI/AGMA 9005-E02 (EP ); ISO 12925-1 CKE

Shell Omala S2 G oils are high quality extreme-pressure oils designed primarily for the lubrication of heavy duty industrial gears. Their high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears.

Chemical nature:
Highly refined mineral oils and additives. The highly refined mineral oil contains <3% (w/w) DMSO-extract, according to IP346.

First-Aid Measures:

• General advice: Not expected to be a health hazard when used under normal conditions.
• If inhaled: No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice.
• In case of skin contact: Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention.
• In case of eye contact: Flush eye with copious quantities of water. Remove contact lenses, if present and easy to do. Continue rinsing.

Stability And Reactivity

• Reactivity: The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph.
• Chemical stability: Stable.
• The possibility of hazardous reactions: Reacts with strong oxidising agents.
• Conditions to avoid: Extremes of temperature and direct sunlight.
• Incompatible materials: Strong oxidising agents.
• Hazardous decomposition products: Hazardous decomposition products are not expected to form during normal storage.

Toxicological Information

• The basis for assessment: Information given is based on data on the components and the toxicology of similar products. Unless indicated otherwise, the data presented is representative of the product as a whole, rather than for individual component(s).
• Information on likely routes of exposure: Skin and eye contact are the primary routes of exposure although exposure may occur following accidental ingestion.

Type:

• Shell Spirax S2 G is a dedicated, high-quality automotive manual transmission gear oil

Best Suited For:

• For medium applications like passenger cars and light duty commercial vehicles.

Benefits: 

• Longer component life & lower maintenance costs due to wear & corrosion protection
• Longer oil life and lesser operating costs due to good oxidation stability

Standards:

• Meets requirements of API GL-4

Shell Coolant LongLife HD is OAT (Organic Acid Technology) based coolant concentrate that provides ultimate all-weather protection to heavy-duty engines in fleet, construction and mining industry .

 

FEATURES

•Red in color •Full Antifreeze coolant •Compatible with hardwater ( up to 700 ppm) •Suitable for use in off-highway equipment, heavy-duty Trucks and Stationary DG sets for all major vehicle manufacturers •Meets JIS K 2234, ASTM D3306, ASTM D6210 •Recommended user instructions:1 conc + 1 part water (-34.5 °C), 1 conc + 2 part water (-14.5 °C) •Recommended replacement interval 100000 km/4000h/ 2 years

Additional Information:

• Delivery Time: 10-12 Days
• Packaging Details: Available in 10L Pails and 209L Barrels