Cutting Oil

• It is due to several inherent strengths that lubricants has the largest Industrial Oil market. Trusted by all our customers for Consistent quality, timely delivery and a robust Technical Services backup, lubricants continues its growth in this segment by offering newer and advanced products as required by the market. 
• Find usages in all applications such as hydraulic systems, enclosed gear boxes, compressors, pumps, pneumatic tools, general purpose machinery applications etc.

These oils are suitable for machining nonferrous metals and light machining and free cutting of steels. Trimofin 14 & 15 are light coloured low viscosity oils recommended for machining of all metals except titanium. These oils are specially designed for honing applications. Trimofin 16 & 18 have higher viscosity and superior wettability. Trimofin 18 is acceptable for drawing of non-ferrous rods and tubing as well.

Oiliness type straight cutting oils. Blends of refined mineral oils and additives improve wetting characteristics. These oils are of non-staining type.

• Excellent cooling
• Excellent chip flushing properties
• High wettability to provide maximum lubricity
• Increased tool life

Mobilmet 420 Series products are high-performance multi-purpose cutting oils. They are chlorine-free, non-staining and non-corrosive. They are designed for light to moderate duty cutting operations and they are also suitable as machine tool lubricants and for use in light duty hydraulic systems. They are formulated from high quality base oils and select additives to provide effective machining performance in a wide variety of operations of both ferrous and non-ferrous metals. The oils are light-colored and transparent so that the work area can be clearly seen at all times. The Mobilmet 420s are formulated to prevent the formation of oil mist in the vicinity of the machine tool.

Mobilmet 420 Series fluids are resistant to foaming, even with excess splashing so that superior performance is provided in the machine tool lubrication system. With relatively low pour points and high viscosity indexes, they are not difficult to dispense in cold conditions and provide adequate film strength in hot-running machine tool bearings under load.

Mobilmet™ 760 Series are extra high performance neat cutting oils. They are chlorine-free and are intended for severe cutting operations especially on difficult to machine steels. Mobilmet 760 Series oils are not recommended for use with copper and it's alloys due to its aggressiveness towards these softer yellow metals. In comparison with other leading premium cutting oils, Mobilmet 760 Series oils have demonstrated superior surface finish, extended tool life and control of built-up edge. Their light colour enables the work area to be seen during machining operations. Closer tolerances are consistently achieved. The oils are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment.

With the benefit of comprehensive development testing using modern machining equipment, plus extensive customer evaluations, Mobilmet 760 Series products, have become the products of choice for many machine shops.

• It is due to several inherent strengths that lubricants has the largest Industrial Oil market. Trusted by all our customers for Consistent quality, timely delivery and a robust Technical Services backup, lubricants continues its growth in this segment by offering newer and advanced products as required by the market. 
• Find usages in all applications such as hydraulic systems, enclosed gear boxes, compressors, pumps, pneumatic tools, general purpose machinery applications etc.

Mobilcut is the trademark for ExxonMobil's line of high performance water miscible metal removal fluids. Formulated with leading edge base oils, additives, and emulsifiers, the Mobilcut series of non-chlorinated products provides dependable performance in a wide array of metal removal processes. The products are designed to work in a variety of hard and soft water qualities and offer low foam potential and long-term corrosion protection for machine and components. Low maintenance and inherently stable, Mobilcut products are designed for the modern machine shop where long service life, excellent machining performance and health and environmental concerns are important factors for increased productivity. These products are supplied in concentrated form and require mixing with water at the point of use.

Mobilcut 220 is a versatile high performance and long life semi-synthetic metalworking fluid concentrate, suitable for all moderate machining and grinding operations on all ferrous and its alloys. It has unique formula with high performance extreme pressure additives, corrosion inhibitor packages and biocides which prevent bacterial & fungal attack and provides long life as well as stable performance during the application. It works very well in general machining and grinding of cast Iron, grey iron, steel and its alloys where traditional soluble oil may not perform adequately.

• It is due to several inherent strengths that lubricants has the largest Industrial Oil market. Trusted by all our customers for Consistent quality, timely delivery and a robust Technical Services backup, lubricants continues its growth in this segment by offering newer and advanced products as required by the market. 
• Find usages in all applications such as hydraulic systems, enclosed gear boxes, compressors, pumps, pneumatic tools, general purpose machinery applications etc.