Brand | Shell |
Model Name/Number | Tellus S2 VX 100 |
Density | 0.870 gm/cm3 |
Flash Point | 230 Deg C |
Kinematic Viscosity 100 C, mm2/s, ASTM D445 | 100 cSt at 40 Degree C,14.0 cSt at 100 Degree C |
Pour Point | -24 deg C |
Viscosity Index | 143 |
Available In Pack Size | 5.0 USG / 18.9 L |
ISO Fluid Type | HV |
Shear Stability | 15 % loss at 100 deg C |
Water Separation | 20 min |
TOST Life | Min 5000 hr |
Benefits:
Brand | Shell |
Model Name/Number | Tellus S3 M |
Density | 855 kg/m3 (15.0 degree C / 59.0 degree F) Method ISO 12185 |
Pour Point | -33 degree C / -27 degree F Method ISO 3016 |
Packaging Type | Drum |
Product Code | 01D7758 |
Appearance | Liquid at room temperature |
Partition Coefficient | Pow Greater Than 6 (Based on information on similar products) |
Lower Explosion Limit | Typical 1 Percent (V) |
Upper Explosion Limit | Typical 10 Percent (V) |
Vapour Pressure | Less then 0.5 Pa (20 degree C / 68 degree F) Estimated value(s) |
Relative Vapour Density | Greater Than 1 Estimated value(s) |
Odour | Slight Hydrocarbon |
Relative Density | 0.855 (15 degree C / 59 degree F) |
Auto Ignition Temperature | Greater Than 320 degree C / 608 degree F |
Viscosity Kinematic | 32 mm2/s,5.5 mm2/s,324 mm2/s |
Flash Point. | 215 degree C / 419 degree F Method IP 34 |
Initial Boiling Point And Boiling Range | Greater than 280 degree C / 536 degree F estimated value(s) |
Technology | Mineral,zinc free |
ISO Viscosity Grade | 32 (Also available in 46,68,100) |
Brand | Shell |
Density | 820 kg/m3 (15.0 degree C / 59.0 degree F) Method ISO 12185 |
Flash Point | 200 degree C / 392 degree F Method ISO 2592 |
Pour Point | -42 degree C / -44 degree F Method ISO 3016 |
Packaging Type | Bucket |
Lower Explosion Limit | Typical 1 Percent (V) |
Odour | Slight Hydrocarbon |
Partition Coefficient N- Octanol Water | Pow Greater Than 6 (Based on information on similar products) |
Product Code | 001F8430 |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Upper Explosion Limit | Typical 10 Percent (V) |
Relative density | 0.820 (15 degree C / 59 degree F) |
Appearance | Liquid |
Viscosity Kinematic | 15 mm2/s (40.0 degree C / 104.0 degree F) Method ASTM D445 |
Model | Tellus S2 VX 15 |
Initial Boiling Point And Boiling Range | Greater than 280 degree C / 536 degree F estimated value(s |
Size | 5.0 USG / 18.9 L |
Auto Ignition Temperature | Greater Than 320 degree C / 608 degree F |
Vapour Pressure | Less Than 0.5 Pa (20 degree C / 68 degree F) Estimated value(s) |
*Your information is safe with us.
Grade | Hydraulic Fluid |
Usage/Application | Industrial |
Brand | Shell |
Packaging Size | 209L |
Model Name/Number | Tellus S2 MX 46 |
Density | 0.856 |
Flash Point | 230 |
Pour Point | -30 |
Color | L0.5 |
Country of Origin | Made in India |
Grade | Hydraulic Oil |
Usage/Application | Industrial |
Brand | Shell |
Packaging Size | 209L |
Model Name/Number | Tellus S1 M 46 |
Density | 0.879 |
Flash Point | 230 |
Pour Point | -30 |
Viscosity Index | 98 |
Country of Origin | Made in India |
Grade | Hydraulic Fluid |
Usage/Application | Industrial |
Brand | Shell |
Packaging Size | 209L |
Model Name/Number | Tellus S2 MX 22 |
Density | 0.852 |
Flash Point | 215 |
Pour Point | -30 |
Viscosity Index | 105 |
Country of Origin | Made in India |
*Your information is safe with us.
Grade | Hydraulic Fluid |
Usage/Application | Industrial |
Brand | Shell |
Packaging Size | 209L |
Model Name/Number | Tellus S2 MX 68 |
Density | 0.860 |
Country of Origin | Made in India |
Grade | Hydraulic Oil |
Brand | Shell |
Packaging Size | 209L |
Model Name/Number | Hydraulic Oil 46 |
Flash Point | 210 |
Kinematic Viscosity 40 C, mm2/s, ASTM D445 | 46 |
Pour Point | -12 |
Viscosity Index | 90 |
Country of Origin | Made in India |
Brand | Shell |
Packaging Type | Bucket |
Features | Reliable protection, Industrial applications |
Model Number | Tellus S4 ME |
Oil Type | Synthetic, Ashless |
ISO Viscosity Grades | HM/22, 32, 46, 68 |
Specifications and Approvals:
Approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers),Bosch Rexroth and many other equipment manufacturers. Industry standards: ASTM D6158, ISO 11158, DIN 51524-2
*Your information is safe with us.
Brand | Shell |
Model Name/Number | Tellus S2 V 32 |
Density | 820 kg/m3 (15.0 degree C / 59.0 degree F) Method ISO 12185 |
Flash Point | 230 degree C / 446 degree F Method ASTM D93 (PMCC) |
Pour Point | 18 degree C / -0.40 degree F Method ISO 3016 |
Packaging Type | Bucket |
Lower Explosion Limit | Typical 1 Percent (V) |
Odour | Slight hydrocarbon |
Partition Coefficient | Pow Greater Than 6 (Based on information on similar products) |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Upper Explosion Limit | Typical 10 Percent (V) |
Relative density | 0.890 (15 degree C / 59 degree F) |
Appearance | Liquid at Room Temperature |
Viscosity Kinematic | 1430 mm2/s (-20 degree C / -4 degree F) |
Auto Ignition Temperature | Less Than 320 degree C / 608 degree F |
Vapour Pressure | Less Than 0.5 Pa (20 degree C / 68 degree F) Estimated value(s) |
Brand | Shell |
Density | 856 kg/m3 (15.0 degree C / 59.0 degree F) Method ISO 12185 |
Flash Point | 220 degree C / 428 degree F Method ISO 2592 |
Pour Point | 36 degree C / -33 degree F Method ISO 3016 |
Lower Explosion Limit | Typical 1 Percent (V) |
Odour | Slight hydrocarbon |
Partition Coefficient N- Octanol Water | Pow Greater Than 6 (based on information on similar products) |
Product Code | 001F8433 |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Upper Explosion Limit | Typical 10 Percent (V) |
Relative density | 0.856 (15 degree C / 59 degree F) |
Appearance | Liquid at room temperature. |
Viscosity Kinematic | 46 mm2/s (40.0 degree C / 104.0 degree F) |
Auto Ignition Temperature | Greater Than 320 degree C / 608 degree F |
Vapour Pressure | Less than 0.5 Pa (20 degree C / 68 degree F) Estimated Value(s) |
Model | Tellus S2 VX 46 |
Initial Boiling Point And Boiling Range | Greater than 280 degree C / 536 degree F estimated value(s) |
Size | 5.0 USG / 18.9 L |
Brand | Shell |
Density | 860 kg/m3 (15.0 degree C / 59.0 degree F) Method ISO 12185 |
Flash Point | 230 degree C / 446 degree F Method ISO 2592 |
Pour Point | -30 degree C / -22 degree F Method ISO 3016 |
Packaging Type | Bucket |
Lower Explosion Limit | Typical 1 Percent (V) |
Odour | Slight Hydrocarbon |
Partition Coefficient N- Octanol Water | Pow Greater Than 6 (Based on information on similar products) |
Product Code | 001F8434 |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Upper Explosion Limit | Typical 10 Percent (V) |
Model | Tellus S2 VX 68 |
Relative density | 0.860 (15 degree C / 59 degree F) |
Appearance | Liquid |
Viscosity Kinematic | 68 mm2/s (40.0 degree C / 104.0 degree F) Method ASTM D445 |
Auto Ignition Temperature | Greater Than 320 degree C / 608 degree F |
Size | 5.0 USG / 18.9 L |
Initial Boiling Point And Boiling Range | Greater Than 280 degree C / 536 degree F Estimated Value(s) |
Vapour Pressure | Less Than 0.5 Pa (20 degree C / 68 degree F) Estimated Value(s) |
*Your information is safe with us.
Brand | Shell |
Model Name/Number | Tellus S3 M 46 |
Packaging Type | Bucket |
Form | Liquid |
Technology | Mineral,zinc free |
ISO Viscosity Grade | 46 (Also available in HM/22,32,68,100) |
Grade | Industrial |
Usage/Application | Industrial |
Brand | Shell |
Packaging Size | 15-20 Litres |
Model Name/Number | Tellus S1 M 32 |
Density | 0.875 |
Flash Point | 215 |
Pour Point | -30 |
Viscosity Index | 99 |
Country of Origin | Made in India |
Grade | Hydraulic Fluid |
Usage/Application | Industrial |
Brand | Shell |
Packaging Size | 209L |
Model Name/Number | Tellus S3 M68 |
Country of Origin | Made in India |
*Your information is safe with us.
Usage/Application | Industrial |
Brand | Shell |
Packaging Size | 209L |
Model Name/Number | Tellus S2 VX 100 |
Packaging Type | Drum |
Country of Origin | Made in India |
Brand | Shell |
Packaging Type | Drum |
Pour Point, degree celsius, ASTM D 97 | -12 deg C / 10 deg F Method ISO 3016 |
Flash Point, degree celsius, ASTM D 92 | 208 deg C / 406 deg F Method ISO 2719 |
Density | 857 kg/m3 (20 deg C / 68 deg F) Method ISO 12185 |
Color | Amber |
Appearance | Liquid at room temperature |
Country of Origin | Made in India |
Initial Boiling Point And Boiling Range | Greater than 280 deg C / 536 deg F estimated value(s) |
Upper Explosion Limit | Typical 10 %(V) |
Lower Explosion Limit | Typical 1 %(V) |
Vapour Pressure | Less than 0 .5 Pa (20 deg C / 68 deg F) estimated value(s |
Relative Vapour Density | Greater than 1 estimated value(s) |
Relative Density | 0.857 (20 deg C / 68 deg F) |
Partition Coefficient N Octanol Water | Pow Greater than 6 (based on information on similar products) |
Auto Ignition Temperature | Greater than 320 deg C / 608 deg F |
Kinematic Viscosity | 270 mm2/s (0 deg C / 32 deg F) Method ISO 3104 |
Brand | Mobil |
Pack Sizes LT/KG | 208L |
Viscosity, ASTM D 445, cSt at 40 degree celsius | 30.4 |
Viscosity, ASTM D 445, cSt at 100 degree celsius | 5.4 |
Pour Point, degree celsius, ASTM D 97 | -12 |
Flash Point, degree celsius, ASTM D 92 | 230 |
Specific Gravity | 15 deg C kg/l, ASTM D 4052 0.857 |
Country of Origin | Made in India |
Mobiltherm heat transfer oils are high performance products intended for use in closed indirect heating installations. They are recommended for use in cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes.
Mobiltherm heat transfer oils are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They are very thermally stable and are capable of an extremely long service life without deposit formation or viscosity increase.
Mobiltherm heat transfer oils have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures. They demonstrate specific heat and thermal conductivities that provide more rapid heat dissipation. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended.
*Your information is safe with us.
Brand | Shell |
Model Name/Number | Hydraulic S1 M |
Packaging Type | Bucket |
Form | Liquid |
Technology | Mineral, zinc-based |
Available ISO Viscosity Grade | HM/32, 46, 68 |