Usage/Application | Bearing |
Color | Red |
Product Type | Gel Grease |
Density | 0.87 Kilogram per litre (kg/L) |
Country of Origin | Made in India |
Smell | Non Small |
Chemical Composition | 3.0 |
Pack Type | Lubricating |
Red Gel Grease is suitable for ball and roller bearing lubrication, where long life and trouble free performance are the key requirements. It is recommended for the high load and speed applications. Its adhesiveness helps to retain for longer time. This grease is widely used in automotive, industrial segments for high temperature and speed applications.it is premium quality lithium Gel automotive grease, with high drop point, good thermal and structural stability and also having resistance against water wash out.
Functional Benefits:
Performance Standards:
Meets IS: 12203:1987 (Reaffirmed 1993) Proprietary Grade NLGI-2.5
Health & Safety:
These greases are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.
Brand | Castrol |
Country of Origin | Made in India |
NLGI Consistency No. | 2 |
Soap Type | Lithium |
Colour | Dark Brown |
Structure | Smooth Buttery |
Pen. Worked 60 X @ 25 DegreeC | 280 |
Rust test Rating | Pass |
Brand | BPCL |
Color | Shiny Crimson Red |
Country of Origin | Made in India |
Appearance | Smooth & Shiny |
Type of Thickener | Lithium |
Worked penetration,@ 25 OC 60 strokes | 235 |
Drop Point, OC | 196 |
Four-Ball Weld Load, kg | 200 |
*Your information is safe with us.
Form | Grease |
Brand | Shell |
Model Name/Number | Shell Gadus S5 V100 2 |
NLGI Grade | 2 |
Drop Point | 260 Degree C / 500 Degree F Method IP 396 |
Product Code | 001D8423 |
Viscosity Temperature | 100 mm2/s at 40 degree C, 14 mm2/s at 100 degree C |
Odour | Slight Hydrocarbon |
Appearance | Semi-Solid at Ambient Temperature |
Lower Explosion Limit | Typical 1 Percent (V) |
Partition Coefficient N- Octanol Water | Pow Greater Then 6(Based on Information on Similar Products) (N- Octanol/water) |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Upper Explosion Limit | Typical 10 Percent (V) |
Vapour Pressure | Less than 0.5 Pa (20 Degree C / 68 Degree F) Estimated Value(s) |
Relative Density | 0.900 (15 Degree C / 59 Degree F) |
Auto Ignition Temperature | Greater Than 320 Degree C / 608 Degree F |
The Shell Gadus range has been developed to deliver best value through enhanced wear protection, long grease life and system efficiency.
From greases that offer reliable performance for standard applications to specialist low noise, high-temperature and heavy-load greases, there is a Shell Gadus product that can help to optimise your system’s efficiency and costs of operation.
Shell Gadus S5 V100 is a lithium complex grease based on synthetic base oils, containing antioxidants, EP-, wear- and rust preventing additives The product contains a special friction modifier which is suitable for high speed bearings, taper roller bearings and cylindrical bearings, type NJ, NUP plus applications with an angle ring.
Form | Grease |
Base Oil | Mineral |
Packaging Type | Bucket |
Brand | Shell |
Model Name/Number | Gadus S2 V150C 3 |
Dropping Point | 180 |
Product Type | Multipurpose extreme pressure grease |
Working Temp | -20 Deg cel to 130 Dec Cel |
Product Code | Shell Gadus S2 V150C 3 |
Worked Penetration | 220-250 |
Form | Liquid |
Size | 15-20Kg |
Base Oil | Mineral |
Packaging Type | Bucket |
Brand | Shell |
Model Name/Number | Gadus S2 V220 0 |
Packaging Size | Bucket |
Dropping Point | 180 |
Product Type | Multipurpose Extreme Pressure Semi Fluid Grease |
Working Temp | -20 Deg cel to 130 Dec Cel |
Product Code | Gadus S2 V220 0 |
Worked Penetration | 220-250 |
*Your information is safe with us.
Form | Grease |
Size | 15-20Kg |
Base Oil | Mineral |
Packaging Type | Bucket |
Brand | Shell |
Model Name/Number | Gadus S1 V160 3 |
Dropping Point | 180 |
Working Temp | -10 Deg cel to 120 Dec Cel |
Worked Penetration | 220-250 |
Brand | Shell |
Model Name/Number | Shell Gadus S3 V220C 2 |
Drop Point | 240 Degree C / 464 Degree F Method IP 396 |
Product Code | 001D8425 |
Odour | Slight Hydrocarbon |
Density | 1,000 kg/m3 (15.0 Degree C / 59.0 Degree F) Method Unspecified |
Appearance | Semi-Solid at Ambient Temperature |
Lower Explosion Limit | Typical 1 percent (V) |
Partition Coefficient N- Octanol Water | Pow Greater Then 6(Based on Information on Similar Products) (N- Octanol/water) |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Vapour Pressure | Less Then 0.5 Pa (20 Degree C / 68 Degree F) Estimated Value(s) |
Relative Density | 1.000 (15 Degree C / 59 Degree F) |
Auto Ignition Temperature | Greater Then 320 Degree C / 608 Degree F |
Upper Explosion Limit | Typical 10 Percent (V) |
Form | Grease |
Packaging Type | Bucket |
Brand | Shell |
Model Name/Number | Gadus S2 V220AC |
NLGI Grade | 0, 1, 1.5, 2, 3 |
Technology | Lithium calcium, mineral, soluble EP additive |
ISO viscosity grade | 220 |
*Your information is safe with us.
Form | Grease |
Size | 18 Kg |
Packaging Type | Bucket |
Brand | Shell |
Dropping Point | 85 Degree C Method IP 396 |
Viscosity of Oil ASTM D 445 cSt at 40 deg C | 320 mm2/s at 40 degree C,16.5 mm2/s at 100 degree C |
Base Oil Type | Mineral Oil |
Cone Penetration Worked | 265-295 mm at 25 Degree C |
Kinematic Viscosity | 320 cst at 40 Degree C (Method IP 71/ASTM D445) |
NLGI Consistency | 2 |
Soap Oil Type | Calcium |
Form | Grease |
Brand | Shell |
Color Visual | Light brown |
Dropping Point deg C ASTM D 2265 | 180 degree C / 356 degree F Method IP 396 |
Density | 900 kg/m3 ( 15.0 degree C / 59.0 degree F ) |
Appearance | Semi - solid at room temperature |
Lower Explosion Limit | Typical 1 %(V) |
Partition Coefficient N- Octanol Water | Pow Greater than 6 (based on information on similar products |
Relative Vapour Density | Greater than 1 estimated value(s) |
Auto Ignition Temperature | Greater than 320 degree C / 608 degree F |
Relative Density | 0.900 ( 15 degree C / 59 degree F ) |
Upper Explosion Limit | Typical 10 %(V) |
Vapour Pressure | Less than 0.5 Pa ( 20 degree C / 68 degree F ) estimated value(s |
Brand | Shell |
Viscosity Temperature | 220/19 mm2/s at 40 Degree C /100 Degree C |
Nlgi No. | 2 |
Flash Point | Greater Than or Equal to 180 Degree C |
Density | 900 kg/m3 (15.0 Degree C / 59.0 Degree F) |
Lower Explosion Limit | Typical 1 %(V) |
Relative Vapour Density | Greater Than 1 |
Auto Ignition Temperature | Greater Than 320 Degree C / 608 Degree F |
Model | Gadus S2 V220 2 |
Relative Density | 0.900 (15 Degree C / 59 Degree F) |
Vapour Pressure | Less Than 0.5 Pa (20 Degree C / 68 Degree F) |
Upper Explosion Limit | Typical 10 %(V) |
*Your information is safe with us.
Form | Grease |
Size | 18 Kg |
Packaging Type | Bucket |
Brand | Shell |
Drop Point | 175 Degree C / 347 Degree F Method IP 396 |
Product Code | 001D8451 |
Flash Point | Greater Than to Equal 180 Degree C,Greater Than to Equal 356 Degree F Method ASTM D92 |
Odour | Slight Hydrocarbon |
Appearance | Semi-Solid at Ambient Temperature |
Lower Explosion Limit | Typical 1 percent (V) |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Country of Origin | Made in India |
Upper Explosion Limit | Typical 10 Percent (V) |
Vapour Pressure | Less Then 0.5 Pa (20 Degree C / 68 Degree F) Estimated Value(s) |
Relative Density | 0.900 (15 Degree C / 59 Degree F) |
Model | Shell Gadus S3 T220 2 |
Form | Grease |
Size | All Sizes |
Base Oil | Mineral Oil |
Packaging Type | Bucket |
Grade | Grade 1 |
Brand | Shell |
Model Name/Number | S2 S220 1 |
Dropping Point | 180 Degree C Method IP 396 |
Drop Point | 180 degree C / 356 degree F Method IP 396 |
Density | 900 kg/m3 (15.0 degree C / 59.0 degree F) |
Appearance | Semi-solid at ambient temperature |
Lower Explosion Limit | Typical 1 %(V) |
Partition Coefficient N- Octanol Water | Pow Greater than 6 (based on information on similar products |
Relative Vapour Density | Greater than 1 estimated value(s) |
Color | Brown |
Cone Pentration Worked | 310-340 mm at 25 Degree C |
Soap Oil Type | Lithium |
Kinematic Viscosity | 220cst at 40 Degree C (Method IP 71/ASTM D445) |
NLGI Consistency | 1 |
Relative Density | 0.900 (15 degree C / 59 degree F) |
Auto Ignition Temperature | Greater than 320 degree C / 608 degree F |
The Shell Gadus range has been developed to deliver best value through enhanced wear protection, long grease life and system efficiency.
From greases that offer reliable performance for standard applications to specialist low noise, high-temperature and heavy-load greases, there is a Shell Gadus product that can help to optimise your system’s efficiency and costs of operation.
Machine Type | Pneumatic |
I Deal In | New Only |
Country of Origin | Made in India |
Air operating range | 40-150 psi (2.8-10.3 bar) |
Noise | Low operational noise |
Lube capacity | 16 oz. bulk / 14.5 oz. cartridge |
Also Includes | Advanced vent valve with filler nipple |
*Your information is safe with us.
Brand | Shell |
Drop Point | 175 Degree C / 347 Degree F Method IP 396 |
Viscosity Temperature | 18 mm2/s Kinematic (100 Deg C / 212 Deg F) Method ASTM D445 |
Flash Point | Greater Than Equal to 180 Deg C / Greater Than Equal to 356 Deg F Method ASTM D92 |
Odour | Slight Hydrocarbon |
Density | 1,000 kg/m3 (15.0 Degree C / 59.0 Degree F) Method Unspecifie |
Appearance | Semi-Solid at Ambient Temperature |
Lower Explosion Limit | Typical 1 Percent (V) |
Partition Coefficient N- Octanol Water | Pow Less then 6(Based on information on similar products) |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Color | Red |
Auto Ignition Temperature | Less Then 320 Degree C / 608 Degree F |
Upper Explosion Limit | Typical 10 Percent (V) |
Relative Density | 0.843 (15 Degree C / 59 Degree F) |
Vapour Pressure | Less Then 0.5 Pa (20 Degree C / 68 Degree F) Estimated Value(s) |
Form | Grease |
Packaging Type | Bucket |
Brand | Shell |
Model Name/Number | Gadus S3 V220C |
NLGI Grade | 1,2 |
Technology | Lithium Complex,Mineral,EP |
Viscosity Grades | 220 |
Wear Protection:
Equipment wear can reduce system efficiency and service life. Protecting components from wear is fundamental for getting the most out of your investments through prolonging asset life and preventing production losses through breakdowns. The Shell Gadus range of greases offers protection across a wide range of applications. The range includes Shells latest extreme-temperature T polyurea synthetic greases, which can help to protect bearings under extreme temperatures, heavy loads and contaminated conditions.
Grease Life:
The longer your grease lasts, the longer your components last and the less lubrication maintenance your equipment needs. Shell Gadus greases are designed to help your equipment continue to operate without interruption. The comprehensive product range enables you to select a grease with a life that meets your operational needs. Customers using Shell Gadus extra-long-life synthetic technologies are doubling grease life for some applications. Others prefer to take advantage of cost-effective, reliable, multipurpose Shell Gadus greases for standard life applications.
System Efficiency:
To help your equipment perform to its design standards, you need a grease that stays in place and provides effective protection and lubrication where you need it.
Shell Gadus greases are designed to help maintain or even improve the efficiency of your systems. From greases that offer reliable performance for standard applications to specialist low-noise, high-temperature and heavy-load greases, there is a Shell Gadus product that can help to optimise your systems efficiency and costs of operation.
Specifications and Approvals: Meets ASTM D4950-08 GC-LB. Approved: Aichel in, D exter Axle, Sr-Norge Aluminium and Willy Vogel Listings: Listed by over 20 major companies from a wide variety of industries
Form | Grease |
Packaging Type | Bucket |
Brand | Shell |
Model Name/Number | Gadus S3 V460D |
NLGI Grade | 2 |
Technology | Lithium Complex, Mineral, EP, Solid EP Additive (MoS 2) |
Viscosity Grades | 460 |
*Your information is safe with us.
Form | Grease |
Packaging Type | Bucket |
Brand | Shell |
Viscosity Temperature | 104 mm2/s (40.0 Degree C / 104.0 Degree F) (Kinematic) |
Density | 890 kg/m3 (15.0 Degree C / 59.0 Degree F) |
Lower Explosion Limit | Typical 1 percent (V) |
Partition Coefficient N- Octanol Water | Pow Greater Then 6 (Based on Information on Similar Products) |
Relative Vapour Density | Greater Than 1 Estimated Value(s) |
Technology | Lithium, Mineral, E P |
Viscosity Grades | 220 |
Upper Explosion Limit | Typical 10 Percent (V) |
Relative density | 0.843 (15 Degree C / 59 Degree F) |
Model | Gadus S2 V220 |
Initial Boiling Point and Boiling Range | Greater Then 280 Degree C / 536 Degree Festimated value(s) |
Vapour Pressure | Less Then 0.5 Pa (20 Degree C / 68 Degree F) Estimated Value(s) |
Auto Ignition Temperature | Greater Then 320 Degree C / 608 Degree F |
Form | Grease |
Packaging Type | Bucket |
Brand | Shell |
NLGI Grade | 1,2 |
Technology | Lithium calcium, mineral, EP, solid EP a dditive MoS 2 |
ISO viscosity grade | 220 |
Model | Gadus S2 V220AD |
Form | Grease |
Size | 15-20Kg |
Base Oil | Mineral |
Packaging Type | Bucket |
Grade | Heavy Duty Grease |
Brand | Shell |
Model Name/Number | Gadus S3V 460 D2 |
Dropping Point | >240 |
Product Type | Multipurpose Heavy Duty Grease with Solids |
Working Temp | -20 Deg cel to +140 Dec Cel (peak 150 deg Cel) |
Product Code | Gadus S3V 460 D2 |
Worked Penetration | 265-295 |